Perfect SOHO gateway router, switch & 11n AP all in one box

Cloud Router Switch is part of the new Smart Switch series by MikroTik. It is a fully functional Layer 3 switch and is powered by the familiar RouterOS. All the specific switch configuration options are available in a special menu, but ports can also be removed from the configuration and used for routing purposes.

What’s more – this device has a built in 2.4GHz wireless access point, which means you can have an AP, a router with any number of ports, and a full wire speed smart switch, all in one device. Ideal for medium/small businesses and offices. It has 24 Gigabit ports, one SFP cage, a microUSB port and a built in Wireless AP.

Product Features

  • Fully manageable L3 switch, full wire speed switching
  • Configure ports as switch, or for routing
  • If required, full RouterOS power right there
  • Ethernet, Fiber, or 4G (with optional USB modem) gateway connection to Internet
  • RouterOS gateway/firewall/VPN router
  • Up to twenty-five gigabit switch ports (1xSFP and 24xRJ45)
  • 1000mW high power 2.4GHz 11n wireless AP
  • Product Specifications

  • CPU: Qualcomm Atheros AR9344 600 MHz
  • Memory: 128MB
  • Ethernet: 24x 10/100/1000 Mbit/s Gigabit Ethernet with Auto-MDI/X
  • Expansion: microUSB port
  • Storage: 128MB Onboard NAND with multiple OS partition support
  • Serial Port: One RJ45 serial port
  • Extras: Reset switch; beeper; voltage and temperature monitoring, touchscreen LCD
  • Power Options: IEC C14 standard connector 110/220V, PSU included
  • OS: MikroTik RouterOS v6, Level 5 license
  • Product Includes

  • (1) CRS125-24G-1S-2HnD-IN Cloud Router Switch
  • >(1) Power Cable
  • (1) USB patch cable for 4G dongle
  • (1) USB Drive
  • Operating System Features:
    The device comes with RouterOS – the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager. RouterOS is a stand-alone operating system based on the Linux v3.3.5 kernel. You can try RouterOS today, go to MikroTik Website for a free-trial demo. The free trial provides all of the features with no limitations. Major features include:

    Statefull filtering
    Source and destination NAT
    NAT helpers (h323, pptp, quake3, sip, ftp, irc, tftp)
    Internal connection, routing and packet marks
    Filtering by IP address and address range, port and port range, IP protocol, DSCP and many more
    Address lists
    Custom Layer7 matcher
    IPv6 support
    PCC – per connection classifier, used in load balancing configurations

    Static routing
    Virtual Routing and Forwarding (VRF)
    Policy based routing
    Interface routing
    ECMP routing
    IPv4 dynamic routing protocols: RIP v1/v2, OSPFv2, BGP v4
    IPv6 dynamic routing protocols: RIPng, OSPFv3, BGP
    Bi-directional Forwarding Detection ( BFD)

    Static Label bindings for IPv4
    Label Distribution protocol for IPv4
    RSVP Traffic Engineering tunnels
    VPLS MP-BGP based autodiscovery and signaling
    MP-BGP based MPLS IP VPN
    complete list of MPLS features

    Ipsec tunnel and transport mode, certificate or PSK, AH and ESP security protocols. Hardware encryption support on RouterBOARD 1000.
    Point to point tunneling (OpenVPN, PPTP, PPPoE, L2TP, SSTP)
    Advanced PPP features (MLPPP, BCP)
    Simple tunnels ( IPIP, EoIP) IPv4 andIPv6 support
    6to4 tunnel support (IPv6 over IPv4 network)
    VLAN IEEE802.1q Virtual LAN support, Q-in-Q support
    MPLS based VPNs

    IEEE802.11a/b/g wireless client and access point
    Full IEEE802.11n support
    Nstreme and Nstreme2 proprietary protocols
    NV2 protocol
    Wireless Distribution System (WDS)
    Virtual AP
    WEP, WPA, WPA2
    Access control list
    Wireless client roaming
    HWMP+ Wireless MESH protocol
    MME wireless routing protocol

    Per interface DHCP server
    DHCP client and relay
    Static and dynamic DHCP leases
    RADIUS support

    Leave a Reply

    Your email address will not be published. Required fields are marked *